YW3 LED High bay light series
YW2 LED Flood light series
YW6 LED Tunnel light series
YW1 LED Panel light series
Your location:Home > Products > YW2 LED Flood light series >

Click to view larger image
Product Name:
YW2004-50W LED flood light
Release Date:
2013/1/4 22:17:24


Factory, gym, dock, billboard, building, tunnel, landscape, city lighting projects.

Safety Notice for Using:
●Please always use the light out of its package.
●Before starting use of the light, please check if the light was damaged during transportation. If any damage shown, please DO not install or use it.
●Any maintenance should be performed by trained professionals only.
●Keep packaging materials away from the reach of children and pets. Risks of suffocation!
●Caution. The packaging contains small parts that may be swallowed by children.
●Never leave children unattended in the vicinity of the lights and do not allow them to play with electrical devices.
●Try to avoid looking directly in the LED beam-especially for extended periods of time. Do not shine the LED lightin another person’s eyes.
●Never cover the light by other objects.
●The products need to re-repair, inspection or special treatment of retirement after service time.
●Prior to cleaning the light, make sure it has been disconnected from the power supply.
●Use a dry or slightly moistened cloth for cleaning.
●Never use any chemicals or abrasives for cleaning.
Used electronic devices must be collected for recycling and can not be deposited together with daily garbage.
●This product should be installed by trained electricians.
●Check integrality of the products when unpack the packing.
●When laying the cables, make sure that the cables and plugs are not subjected to any tensile or twisting forces.
●Fit the cable tension relieving mechanisms to the connection points of the surface-mounted lights. Do not kinkcables. Output cables should be laid separately and at a distance from other cables.
●Proceed by connecting the wiring cables to the luminaries. Usually, the brown(or black) wire is the live wire,
●connect it with the terminal marked “L”. The blue wire is Naughty wire, connect it with the terminal marked “N”.
●Used only the LED driver included, and do not connect the surface-mounted lights to other loads.
●Do not remove the name plate of the power supply and driver of the light.

Non-professionals are not allowed to disassemble and maintain the products. We have the right not to provide after-sale service if unauthorized disassembly and maintenance happens to the products.


Copyright◎ 2013 SHEN ZHEN YOUWIN OPTRONICS CO.,LTD All Rights Reserved.