Products
YW3 LED High bay light series
YW2 LED Flood light series
YW6 LED Tunnel light series
YW1 LED Panel light series
Products
Your location:Home > Products > YW1 LED Panel light series >

Click to view larger image
Product Name:
YW1035-6060 LED panel light
Model:
YW1035-6060
Release Date:
2013/7/22 16:49:31
  [Back]
   
Applications:

Conference/Meeting rooms; Hotels; Factories & Offices; Commercial Purposes; Residential & Institution Buildings; Schools, Colleges &Universities; Hospitals;
Places where energy is saving and high color rendering index lightings required.

 

Safety Notice for Using:
Please always use the light out of its package.
Before starting use of the light, please check if the light was damaged during transportation. If any damage has occurred, please DO NOT install or use it.
Any maintenance should be performed by trained professionals only.
Keep packaging materials away from the reach of children.

Caution. The packaging contains small parts that may be swallowed by children.
Never leave children unattended in the vicinity of the lights and do not allow them to play with electrical devices.
Try to avoid looking directly in the LED beam-especially for extended periods of time. DO NOT shine the LED light in another person’s eyes.
Never cover the light by other objects.
Installation:
This product should be installed by trained electricians.
Check integrality of the products when unpacking.
The distance between the light and any flammable materials must not be less than 0.2m. The distance between the upper part of the installed light and the ceiling must not be less than 5cm. The light must not be installed into ceilings or walls that contain heat-insulating material. The main cable must not connect with the low voltage cable or the surface-mounted lights.
Guide the lights’ connecting cables through the drilled-out hole, and fix the surface-mounted lights with the pre-fitted clips. Make sure that that these are securely connected to the base material.
When laying the cables, make sure that the cables and plugs are not subjected to any tensile or twisting forces. Fit the cable tension relieving mechanisms to the connection points of the surface-mounted lights. DO NOT kink cables. Output cables should be laid separately and at a distance from other cables.
After installation, connect the transformer to the mains supply.
Proceed by connecting the wiring cables to the luminaries. Usually, the brown(or black) wire is the live wire, connect it with the terminal marked “L”. The blue wire is the Neutral wire: connect it with the terminal marked “N”.
Used only the LED driver included, and do not connect the surface-mounted lights to other loads.
Do not remove the name plate of the power supply or driver of the light.
Maintenance:
Prior to cleaning the light, make sure it has been disconnected from the power supply.
Use a dry or slightly moistened cloth for cleaning.
Never use any chemicals or abrasives for cleaning.
Proposal:
Used electronic devices must be collected for recycling and can not be deposited together with general rubbish.
Notes:
Non-professionals are not allowed to disassemble and maintain the products. We have the right not to

provide after-sale service if unauthorized disassembly and maintenance happens to the products.

 

Copyright◎ 2013 SHEN ZHEN YOUWIN OPTRONICS CO.,LTD All Rights Reserved.

三辊闸翼闸深圳网站推广深圳画册设计